Main functions and features

Anti-over travel

Every time the first power-on operation, the gate will be slow to the limit, to prevent inertia out of the limit. When the door reaches the travel limit, it can only press the button in the opposite direction, so that the motor can move to prevent it from rushing out of the limit. If the limit magnet is damaged or fails out of the limit, it will automatically encounter resistance to protect the motor and control main board.

Note: When the door is out of the limit, there is a power off protection function, and

it can only move in the opposite direction after powering on.

Co-op Mode Available

Two motors with the same type of control board on each can work synchronously. In this mode, infrared, loop, auto- close and other functions are synchronized.

Motor running time protection

Avoid motor running for a long time in stroke failure. After the control main board learns the stroke, the longest running time of the motor will be increased for a period of time on the basis of the stroke time to avoid the long running time of the motor.

Automatic door closing function

The waiting time of the automatic door closing function can be adjusted according to the needs of the use, in the range of 1 to 250 seconds.

Soft start and soft stop function

The slow speed strength and slow speed distance of the motor can be adjusted by potentiometer. Adjust the speed and distance of the motor when it enters the slow speed.

Resistance rebound function

When the gate is blocked, the gate can be switched in two ways: stop and rebound. The gate will stop immediately if the door is blocked.

Bluetooth control module

Original on-board Bluetooth module slot design, suitable for independent Bluetooth

module (optional).

One-click matching Internet gating

The control main board can be directly matched to the Internet controller/camera without adding any wiring equipment.

Technical specifications

Packing details

Safety Protection and Precautions

1. For your personal safety, please follow the installation instructions carefully. Incorrect installation or improper use of the product may cause serious damage to people and/or property.

2. Keep the Manual properly for future use.

3. We will accept no responsibility for any consequences resulting from inappropriate use of the machine or from use beyond the specified purposes.

4. Do not install the machine in the area where there are inflammable and explosive dangerous goods or a lot of smoke to avoid serious safety accidents.

5. We will accept no responsibility for any problem incurred due to neglect of the process requirements of precision components or due to deformation of such components during the installation.

6. Before system overhaul, cut off the power and check if the grounding system is correct and reliable.

7. We will accept no responsibility for any safety problem or operation failure caused by the use of any component not produced by us.

8. Do not make any change to the components of the system.

9. The installer must explain in detail to the user the operating rules of the machine and relevant regulations in case of an emergency, and provide the user with the Manual.

10.Keep children and other unauthorized persons away from the installation site and make sure there is no risk factor existing in the vicinity of the installation site.

11.Keep the remote control out of the reach of children. Failure to do so may incur accident to children.

12.Don’t try to repair or adjust the system by yourself. Contact professionals instead.

13.Check the installation, especially the cables, springs, and fittings for signs of wear, damage, or imbalance. Do not use if repairs or adjustments are needed, as faulty installation or improper door balance may cause injury.

Founded in 2002, SINOMATIC is a national high-tech enterprise specialized in R&D，production, and sales of intelligent access control products. It has nearly 200 patented technologies. Its main products including Access control turnstile, parking barrier gate/parking lock, Automatic gate opener, Anti-terrorism roadblock, etc., are suitable for the entry and exit management of vehicles and personnel such as government building, high-speed toll gate, commercial plaza, residential areas, stations, customs checkpoints, etc.

SINOMATIC has strong innovation and R&D capabilities, ultra-high technology, and craftsmanship, leading the industry into the era of intelligent variable speed interconnection.

As an innovative enterprise, SINOMATIC has always been committed to building an efficient and innovative R&D team to continuously promote technological and product innovation, improve the core competitiveness and market share of the enterprise.

At the same time, SINOMATIC attaches great importance to the construction of the talent team and focuses on introducing and cultivating high-quality R&D personnel in the field of research and development.

Technological innovation, product quality, and manufacturing capabilities are the driving force of SINOMATIC's continuous development. Brand, channels, and after-sales service are the pillars of SINOMATIC's long-term development. SINOMATIC products are sold all over the world. It has set up agency service outlets in more than 150 countries and regions including United States, Canada, UK, France, Germany, Russia, India, Singapore, Malaysia, Indonesia, Thailand, Turkey, Israel, UAE, Saudi Arabia, South Africa Nigeria, Kenya, etc.

With superior product quality and a high-quality after-sales service system, "SINOMATIC" has become a world-renowned brand of Access control products. SINOMATIC always keeps forging ahead, makes every product with hearts, and adheres to build trustworthy SINOMATIC quality and Chinese national brand in the world.