PRODUCT DESCRIPTION
Thank you for purchasing the 5th generation brushless motor barrier
gate. This product adopts the latest mold design technology, mold
die-casting manufacturing technology, brushless control speed
regulation technology, left and right interchangeable quickly, no
clutch design, more reliable quality, more convenient to use, the
movement adopts two-stage worm gear drive, Three-curved connection
rod structure, and the arm works fast and stable. Easy maintenance
and long service life.
PRODUCT ADVANTAGES
The 5TH Generation Brushless DC motor is composed of a motor main
body and a driver. It is a typical mechatronic product. It has the
characteristics of small size, low noise, high efficiency, wide
speed range, and small steady-state speed error. The Six-generation
gearbox dedicated for barrier gates, multiple speed ratios to
choose from, stable operation, customized gear transmission with
higher efficiency and high stability, is more and more praised by
the market.
TECHNICAL SPECIFICATIONS
| Product name | 5TH BLDC barrier gate | 5TH BLDC barrier gate |
| Model | DZ-2212 | DZ-2212 |
| Cabinet size | 305*240*935(mm) | 305*240*935(mm) |
| Working Temperature | -35℃~+65℃ | -35℃~+65℃ |
| Power Supply | AC110V/220V; DC24V | AC110V/220V; DC24V |
| Open/close Speed | 1.2s-3Sec(Adjustable) | 2.5s-6s(Adjustable) |
| Rated Power | 150W | 150W |
| Driving Method | DC brushless motor | DC brushless motor |
| Humidity | ≤90% | ≤90% |
| Remote Control Distance | ≤100m(open,sunny weather) | ≤100m(open,sunny weather) |
| Protection Grade | IP54 | IP54 |
| Motor No-load speed | 1850r/min | 1850r/min |
| Max Boom Length | 3m-4.5m | 3m-6m |
MAIN FUNCTION AND FEATURES
1. Operation speed can be adjusted.
2. Slow up and slow down can be adjusted.
3. The limit angle can be adjusted.
4. Left and right direction can be quickly interchanged.
5. The barrier arm can be manually operated in case of power
failure.
6. 418 frequency learning code anti-copy remote controller.
7.Infrared photocell sensor I/O signal input function.
8. Loop detector and radar I/O signal anti-collision signal input
function.
9. Up, down and stop I/O signal input function.
10. Counting (fleet) function.
11.LED light I/O signal output function.
12.Traffic light I/O signal output function.
13.Up and down in place, normally open and normally closed signal
output function.
14.RS485 communication output function.
15.Delay arm drop function.
16.Arm auto-reverse function.
17.Automatic lifting function when power is off (requires
additional power storage module).
18.I/O port single-key cycle up and down function.
19. Loop detector normally open and normally closed function.
20.One car passes through each signal to prevent toll evasion
function.
21.Anti-collision alarm function (requires additional alarm and
sensor).
22. Fire linkage signal input function.
23.The I/O port closes the signal input function.
24.24V storage battery input function.
PRECAUTIONS
1. Follow the correct wiring method to avoid the motor not rotating
or burning.
2. The motor should not be overloaded and locked for a long time to
avoid excessive temperature rise.
3. Don't disassemble and assemble the assembled gear reducer
casually, so as to avoid the entry of sundries or the bad gear
meshing and make noise.
4. When connecting the output shaft of the motor and the gear
reducer to the load, it cannot be struck or squeezed by gravity, so
as to avoid internal deformation and misalignment, resulting in
serious noise or jamming.
5. The lead wire of the motor cannot be pulled with force to avoid
electric shock accidents.
6. Avoid touching the rotating parts when the motor is running to
avoid human injury; the motor casing should be well grounded.
