Smart Self repositioning 180 degree parking reservation lock anti
collision with Motion sensor
Product Installation
1, Installation Spot: It is suggested to install the parking lock
at the very center of parking seat.
2,Installation Ground: To install the parking lock in a dry and
smooth concrete ground, and no radio signal interference around.
3,Installation Steps: Drill four corresponding holes 10× 5mm in the
ground and use four expansion bolts
prepared in the package to fasten it. (As the following drawing
shows)
Technical specification:
| Voltage | DC12V | Battery | DC12, 7Ah |
| Dimension | 357×370×82.5mm | Current | 0.4A |
| Running Time | 4~6s | Extended Height | 340mm |
| Remote Distance | >15M | Working Temperature | -35°C~+55°C |
| Weight Born | 5t | IP Class | IP68 |
Product Features
1. Energy-saving; the battery is a best product in China, power can
last for half a year.
2. Safe; the power connection is anti-disconnecting design in case
that the user misplaces the
battery causing short circuit; battery installation is easy.
3. Durable; the cabinet is made of die-casting Zinc alloy with high
quality, and the maximum
weight of load-bearing is 5 tons; the cabinet is coated with
varnish, being water-proof and
anti-rust in harsh weather. The sway arm is made of
fiber-reinforced nylon, and it will not
deform even after car crushing.
4. Hermetic; the cabinet is tightly closed, and Protection Grade is
IP68. It is waterproof and
dust-proof. It can be used broadly.
5. Intelligent self re-positioning; the external force could not
change the sway arm position when
it is vertical; when the sway arm is forced to a horizontal
position, it will re-position vertically,
unless the user uses remote control to put it horizontally.
6. Noise-free; bearing transmission design of the motor makes
almost zero noise. It is beneficial
for battery and motor longevity and lesser friction.
7. Burglarproof; the mounting bolts are placed inside of the
cabinet and without key, no one can
open it.
8. Installing friendly: four prepared holes at the bottom of the
cabinet makes it easy to install.
Package:
Product Fault Handling
1, it can not work when pressing the button
A, please check whether the battery has enough power or not
B, Please check whether the storage battery need to charge or not
C, Please check whether your operation is correct or not(If you
want to control the parking lock in
the car, you need to put it in the front of the windscreen, and
press the button for 1 or 2 seconds.).
D, Please check whether you have kept the remote controller away
from the interference sources
(interference sources refer to those messy electrical waves that
can interface wireless radio signals,
such as the strong and weak current or the network cable)
E, Please check whether the distance between the remote controller
and parking lock are suitable
or not
F, Please check whether it is the bad weather that makes the remote
controlling distance get
shorter.
