Sign In | Join Free | My burrillandco.com |
|
Ask Lasest Price | |
Brand Name : | SINOMATIC |
Model Number : | LD-600 |
Certification : | CE/ ISO |
Price : | negotiable |
Payment Terms : | T/T, Western Union, MoneyGram, , L/C, D/A, D/P |
Supply Ability : | 5000 pcs per month |
Delivery Time : | 3-5 working days after payment received |
5W 170KHz Double Channel Big Vehicle 220V 110V Loop Detector
General description
SINOMATIC Loop detector model LD-600 is used for wherever vehicles have to be detected, for example
for monitoring and safe-guardingaccess ways or for counting vehicles. The output signal can be used for
controlling door drive mechanisms, operating barriers, activating card dispensers etc.
Technical Parameter
Work voltage | AC 110V220V, DC12V-24V | Relative humidity | ≤95% |
Operating Temp | -30℃~75℃ | Storage Temp | -40℃~85℃ |
Shell | PC+ABS engineering plastic | Installation | DIN rail |
Dimension | 110*70*118mm | Net weight | 400g |
Power consumption | <5W | Relay output | DC 24V/3A |
Frequency range | 20KHz~170KHz | Reaction time | 10ms |
Sensitivity | 10 grades adjustable | Automatic calibration | 2s~5s |
Main features
PRODUCT DIMENSION:
Double loop detector LD-600 panel
a. Tune
The tuning range is from 50µH to 1000µH, and such wide tuning range
ensures low requirements for the loop and
wiring. Any inductance changes will feedback to the compensation
circuit in detector to ensure normal work.
b. Adjustable sensitivity
When in low sensitivity, the detector will detect vehicles with
high chassis or trailers correctly except cars, bicycles
and other small metals. The sensitivity adjust button is the rotary
encoder switch on the panel, “0” with low
sensitivity and “9” with high sensitivity. The A switch on left is
corresponding to loop A, while B on right is
corresponding to loop B.
c. Reaction time
Its definition is the time starting from the metal enters into the
loop and ending when the detector gives indication
signals.
d. Frequency adjustment
When power on, the detector can calibrate itself automatically and
the two red lights are on which will
continue for 2s.
e. Output mode of relay
Every channel has two relay outputs in our detectors. There are two
relays A1 and A2 with channel A. And there
are two relays B1 and B2 with channel B. Relay A1 and B1 are
existing output (on when metals on the loop and off
when metals leaving). Relay A2 and B2 are multifunctional output
set by the three bit code switch on the left of the panel.
Operate as follows:
![]() |